Skip to Search Skip to Content Skip to Footer

Connected Rogers

Quick Tips


Here’s how to program your Rogers remote:

  1. Turn on your TV, then press TV. It will blink once.
  2. Press and hold SETUP until the TV button blinks twice, then release it.
  3. Press 9 9 1 (the TV button will blink twice).
  4. With the remote pointed at the TV, press Power.
  5. Repeatedly press and release Channel + until your TV turns off. Now the remote will cycle through all possible codes until a match is found. You may need to press Channel + several times to find a match.
  6. Once the TV turns off, press SETUP once to lock the code. Then press POWER to turn on your TV and to confirm the code was correct and is locked.

More How-To


25 thoughts on “How-To: Program your Rogers Remote

Gisela Kabelitz, on said:

I would like to use my netflix with the new cablebox and remote but dont know which butten will get me to netflix, can you help? I dont want to mess the TV up as I did before!
Thank you


Dennis, on said:

I followed the instructions and pressed the channel+ button at least 200 times with no result. I can’t find the booklet that came with my remote. Is there a place on the web I can find the codes for SONY TVs?


Rosemary, on said:

All channels are OK on my TV but I seem to have lost 100 on demand. Did I do something to delete it?


Les, on said:

I have just moved in.
Rogers technical has been .
The remotes were wirelessly programmed from the basement.
I can turn TV on and off with remote.
Both boxes ( PVR) and Netbox are working, I can get channel 2 only on one and I can go downstairs and manually change channels for the upstairs TV.
Geek squad told me it is the Rogers remotes that need to be reprogrammed and are not working with the sensor below the TV’s.
Any advice??


Olivia, on said:

All of the the steps I have followed to program my remote worked until the 991 part. When I press power, my tv just turns off. Am I doing something wrong?


Peter, on said:

I want my remote to control ONLY the volume for my Nextbox 3.0, not my TV. The guide says that, by default, that’s what the remote is supposed to do. Yes I can make it control my TV but that’s not what I want. I want volume control for the digital box only and it wont do it. Thanks.


Chris, on said:

Whenever I want to view the tv guide I have to press the guide button twice. Is there anyway that I can go straight to the tv guide with one press of the guide button?


STEVE SLEIGH, on said:

Good morning,

As a visually impaired person I have a recommendation for an accessibility feature to be included on your channels that display a listing of any channels and times. This would include the “guide” selection from the handset, HBOCD 311, 100, etc. The feature I am recommending is that the person would have the option to select a voice over that would read the items as you scroll down through the lists. As it currently stands, I am usually left to asking my family members to read the lists for me.

It’s my understanding that there are over 1.2 million people in Canada who are either visually impaired or blind. Keep in mind that our country is advancing with an aging population. Furthermore this accessibility feature could also be beneficial to those individuals that have learning disabilities such as dyslexia. Any consideration with respect to this request would be appreciated by many Canadians…. And if this feature already exists, please send the information to me on how to access the functionality.


    Peter Theimer, on said:

    sounds like an excellent idea

    RE: How to program your remote …

    Whhy on earth would I want to program an emergency phone number — 911 — onto a TV remote ? What is the point of this excersise ?

    Awaiting your reply with interest

    ConnectedStaff, on said:

    Hi Peter,
    This how-to is for setting up your Rogers Remote. In order to do this, you’ll have to press 991 (step 3). Thanks.

Shai Razieli, on said:

We are a long time connected to a news channels package included FOX NEWS on channel 181. My question is, why don’t include Fox News in the HD 501 and above. Why we have to view it as a regular channel and not as HD, while CNN MSNBC and the rest are full 1080 p HD?


Reid King, on said:

I have the same issue as Denise. …sort of. The tv works great but I cannot control the volume with the rogers remote. I have to use the Samsung remote to adjust the volume only. I sure hope you can help out.


Paul Laycox, on said:

Why does the volume not work on the remote after programming it.


Don, on said:

I have a brand new RCA TV and I tried everything to program your remote to it and I could not, does anyone know if this is not programmable or what can I do to make it work.


Paul Pergau, on said:

Why must I have a data plan (mobile access) in order to use my Smart Phone as a TV Remote? Why can I not use my wifi connection instead?


Marilyn, on said:

Is there a sleep feature button on it?


JULIA ISAACS, on said:



Denise Bulatovich, on said:

do I program my "DVD" and "VCR" the same way as I program the TV?


Leave a Comment

Your email address will not be published. Required fields are marked *



Popular Tags